Bushman First Flush Connection Kit 1
Bushman First Flush Connection Kit 2Bushman First Flush Connection Kit 3
Bushman USA
Lead Time:  1 Week
Ships From: Pennsylvania

Quantity

Customer Reviews
Share this page!
Twitter

Model: BCK0001
Manufacturer: Bushman USA

This is the Bushman Rainwater First Flush Connection Kit for above ground rainwater harvesting systems. Bushman offers the Bushman Connection Kit (BCK) to provide all of the accessories required for installation of a complete above ground rainwater harvesting system. The kit is contained in a single package designed for use as a workbench. Step-by-step instructions are also included for easy installation.

FREE SHIPPING!

Kit Includes:
  • One Water Diverter Assembly
  • One Conductor Debris Separator
  • Two 3" diameter 6-ft. sections of pipe (for Downspout and Inlet connections)
  • One 4" diameter 6-ft. section of pipe (for Water Diverter Assembly)
  • 90 Degree Elbow for Inlet connection
  • Three pipe clamps and mounting hardware
  • One can of grey primer paint (Matching paint to be purchased locally)
  • One paint brush
  • "Workbench" package with step-by-step installation instructions


First Flush Kit Informational Brochure

PDF  Bushman First Flush Connection Kit Brochure

Kit Dimensions

Width: 14 inches
Length: 87 inches
Height: 7 inches
Weight: 35 lbs

Store Pickup Information

Store pickup is a flat $25 fee available at either of the following locations:

Snyder Industries
4700 Fremont Street
Lincoln, NE 68504
Bushman USA
Bushman Warranty Details:

Bushman Water Harvesting Corporation (dba Bushman USA) Limited Warranty BUSHMAN WATER HARVESTING CORPORATION (dba Bushman USA) (Seller) warrants its water storage tanks sold in the United States against defects in materials or workmanship for three (3) years from the date of purchase. The Limited Warranty is dependent upon installation in accordance with Seller's specifications and the use of Seller's components, accessories and designated application practices exclusively. If a defect is discovered in normal use of a tank in the manner intended, Seller will, at its sole election, repair or replace the tank. In no event will Seller's responsibility exceed the purchase price of the tank received by Seller. Additional requirements or terms of this Limited Warranty are:

1. The Limited Warranty extends to the original purchaser only and is not transferable by operation of law or otherwise.

2. The Limited Warranty is limited to the repair or replacement of the tank, at the sole discretion of Seller. Seller is not liable for any damage to property or any other associated costs that may occur when repair or replacement of the tank is carried out. Repair work is undertaken at ground level, so tanks that are located on stands must be brought down to ground level before Seller can commence repair work.

Note that expenses such as landscaping, plumbing, electrical, costs of lifting equipment and hire of additional labor are at purchaser's expense. Bringing tanks down from stands for repair work is also at the purchaser's expense.

3. The Limited Warranty does not apply to the tank color, which may in time fade or change.

4. The Limited Warranty applies to the one piece polyethylene structure of the tank and does not extend to fittings such as the strainer, outlet, valve, tap, overflow or any other fittings, accessories or ancillary components. Some fittings, accessories and ancillary components are covered under a separate limited warranty program, which is available upon request.

5. The Limited Warranty on water tanks is for the storage of water only, at a water temperature not exceeding 73F/23C. The Limited Warranty does not apply to tank damage due to freezing.

6. The Limited Warranty on water tanks is for storage of water on the site only. Transporting water in water tanks voids the Limited Warranty.

7. The Limited Warranty is void and will not be binding upon Seller in the event of damage to unsecured tanks through blowing away, or by abuse, improper installation, unsound base, or unauthorized modifications to the tank.

Note that all installation instructions must be followed and in particular the fitting of flexible hoses.

8. Seller must be notified of any defect or fault (using a Seller-approved claim form) within seven (7) days of it occurring. Seller must be given the opportunity to inspect the tank within thirty (30) days of such notification, otherwise the Limited Warranty is void.

9. THIS LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY PROVIDED BY SELLER AND IS IN LIEU OF, AND SELLER DISCLAIMS, ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING, WITHOUT LIMITATION, (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, (II) ANY IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE, (III) ANY OTHER OBLIGATIONS OR LIABILITIES WHATSOEVER, WHETHER IN CONTRACT, WARRANTY OR TORT, OR BY STATUTE OR OTHERWISE FOR ANY NONCONFORMANCE, DEFECT, DEFICIENCY, FAILURE, MALFUNCTION OR FAILURE TO PERFORM, (IV) STRICT LIABILITY OR PRODUCT LIABILITY, AND (V) ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL AND INCIDENTAL DAMAGES OF ANY NATURE WHATSOEVER.

INC 5000 Awards!
Inc 5000 Awards
TankAndBarrel.com has been awarded a ranking with the INC 5000 - 4 years in a row - as one of the fastest growing private companies in America!