Valves, Adapters & Pickup Tubes

This is a 3/8" drain plug used on RDS fuel tanks.…

Roll over valve for RDS fuel tanks. 1/2 Inch Threads.…

Manual Shut Off Valve - Aluminum 3/8" NPT x 5/16" Barb…

Fuel Pick-Up Assembly For RDS 12 3/4" Tanks…

Fuel Pick-Up Assembly For RDS 19" Tanks…

Fuel Pick-Up Assembly For RDS 24" Tanks…

Fuel Pick-Up Assembly For RDS 36" Tanks…

2 Inch T-Adapter (Filler Neck Adapter). These are typically used with Chevy/GMC trucks (1999-2010). This T-Adapter will also include the pictured roll-over valve.…

1 1/2 Inch T-Adapter (Filler Neck Adapter). These are typically used with Ford (1999-Current), Chevy/GMC (2011-Current), Dodge (1999-2012). This T-Adapter will also include the pictured roll-over valve.…

1 3/4 Inch T-Adapter (Filler Neck Adapter). These are typically used with 2013-Current Dodge trucks. This T-Adapter will also include the pictured roll-over valve.…

This is the RDS 2" to 3/8" Adapter Assembly (Includes Pickup Tube & Anti-Siphon Valve). This is an adapter for those using gas trucks and need to pull gasoline from the top of the…

This is the locking cap assembly for the 2 inch bung location on a RDS transfer/refueling tank. This would only be used if you are NOT using a tank mounted pump! This assembly…

This is the RDS Marine Tank Fuel Demand Valve with a 3/8 inch fuel line hose barb. This is a replacement fuel demand valve. You will need to remove the bottom barb from your old…

This is the RDS Marine Tank Fuel Demand Valve with a 1/2 inch fuel line hose barb. This is a replacement fuel demand valve. You will need to remove the bottom barb from your old…

This is the Attwood Integrated Fuel Demand Valve, Part #99IFDV00-1. The integrated fuel demand valve, used in conjunction with integrated fuel systems, is for below-deck use, eliminates pressurized fuel from reaching fuel distribution lines…