Walrus Submersible Low Suction Water Pump (68 GPM) 1
Walrus Pump Co.
Lead Time:  1-3 Days
Ships From: TX

Quantity

Customer Reviews
Share this page!
Twitter

Model: WA-PW400AD
Manufacturer: Walrus Pump Co.

This is the Walrus Submersible Low Suction Water Pump - 68 GPM. This submersible water pump is to be used with clean water. It is corrosion resistant and compact for multiple usages. The motor also has thermal overload protection.

This is a low suction water pump, allowing low suction of water down to .12 inches.

NOTE: This is a 110/115 Volt pump, we do not offer this in 220/230 Volts

Applications

1. Water circulating of ponds
2. Lawn sprinkling
3. Garden watering and car washing
4. Dewatering the basement
5. Trenches
6. Excavation and construction sites

Features

1. Submersible pump for clean water.
2. Corrosion resistant and compact.
3. Bulit in capacitor.
4. Supplied with power cable and plug.
5. Motor protected from thermal overload. 6. Suitable for cleaing washing towers and other confined spaces.

Specifications

1. Power supply: single-phase 60 Hz
2. Power: 400W
3. Insulation class: B
4. Protection: IP68
5. Length of cable: 13 ft or 16 ft
6. Delivery: up to 68.6 GPM
7. Head: up to 32.8 ft

Suitable Liquids

1. Suitable to pumping clean, non-aggressive water and slightly dirty (grey) wastewater.
2. If you need to pump salt water, please look at model PW100AR and model PW400AR.
3. Temperature of pumped liquid: +39.2 F to +95 F

Detailed Information
PDF  Walrus PW-A Series Submersible Pump Information

Instruction Manual
PDF  Walrus PW-A Series Submersible Pump Instruction Manual
Walrus Pump Co.

Walrus Warranty Details:

Limited Warranty

Products manufactured by Walrus Pumps Co (Walrus) are warranted to the first user only to be free of defects in material and workmanship for a period of 12 months from date of installation, but no more than 24 months from date of shipment. Walrus' liability under this warranty shall be limited to repairing or replacing at our election, without charge, FOB Walrus' distribution center or authorized service agent. Walrus will not be liable for any cost of removal, installation, transportation or any other charges that may arise in connection with warranty claim. The warranty period commences on the date of original purchase of the equipment. Proof of purchase and installation date, failure date, and supporting installation data must be provided when claiming repairs under warranty. This warranty is subject to due compliance by the original purchaser with all directions and conditions set out in the installation and operating instructions. Failure to comply with these instructions, damage or breakdown caused by fair wear and tear, negligence, misuse, incorrect installation, inappropriate chemicals or additives in the water, inadequate protection against freezing, rain or other adverse weather conditions, corrosive or abrasive water, lightning or high voltage spikes or through unauthorized persons attempting repairs are not covered under warranty. Walrus will not be liable for any incidental or consequential damages, losses, or expenses, arising from installation, use, or any other causes. There are no express or implied warranties, including merchantability or fitness for a particular purpose, which extend beyond those warranties described or referred to above. Certain states do not permit the exclusion or limitation of incidental or consequential damages or the placing of limitations on the duration of an implied warranty, therefore, the limitations or exclusions herein may not apply. This warranty sets forth specific legal rights and obligations, however, additional rights may exist, which may vary from state to state.

INC 5000 Awards!
Inc 5000 Awards
TankAndBarrel.com has been awarded a ranking with the INC 5000 - 4 years in a row - as one of the fastest growing private companies in America!